Tekniset tiedota

Tekniset tiedot

Working measurements

Maximum board stack for Stack Cutter 1500
Max. width:  1450 mm 
Max. height:  1450 mm

Dimensions

Stack Cutter outer measurements.
Length:  2600 mm 
Width:  1100 mm 
Height:  1900 mm

asdfsdafasd

Electrical system and motor

The electrical motor is a specially wound, Danish ABB motor with a rated output of 5kW. While cutting, the motor load is 7-8000 W. It is protected by a temperature sensor.

Total continous output: 5 kW 
Electricity supply: 3-Phase 16A , 400V 

Insulation class: IP54 

This insulation class means that the motor and the entire electrical system are unaffected by running water, thus capable of standing outdoors in the rain.

Sound level and ergonomics

The Stack Cutter 1200 is designed to provide the user with the best possible working conditions. The controls are positioned at work height and a Plexiglas sheet protects the operator against any flying chips. The sound level requires hearing protection.

Acoustic pressure: 102,0 dB (A) 
Acoustic power: 113,0 db (A) 
Vibrations in the controls: Very slight

Cutting equipment

Logosol has a deep experience with different cutting machines and have chosen a standard 3/8” cross-cutting chain for the Stack Cutter.

Chain pitch: 3/8 inch 
Chain speed: 22,5 m/s

Chip handling

The Stack Cutter works perfectly well without any chip transport equipment. However, since this will create considerable quantities of chips on the work site, a chip fan is recommended.

A simple chip fan is included with the Stack Cutter 1200 as an accessory to be fitted on the Stack Cutter support legs. Connecting the Stack Cutter to existing chip evacuation systems works equally well.

Chip outlet (connection for flexi-hose): 100 mm 
Min. chip fan capacity needed: 700 m3/h