Technical Data
Weight: 38 kg (85 lbs) without a saw unit
Length: Standard length is 2,75 m (9 ft)
Width: 1,1 m (44")
Height: 1,0 m (40")
Space between the logsupports: 1,1 m (44")
Maximum diameter of logs: 0,9 m (36")
Maximum length of logs: Standard length is 2,5 m (8 ft 3"), but the sawmill can be extended to any length.
Optional equipment: Gas chainsaws, electric chainsaws, guide bars, chains, log house molder etc.
- Special screw-nuts that allow quick yet stable fastening of the gas chainsaw.
- Sled glides effortlessly along the guide rail.
- The log support is easily adjusted (the scale spacing is 6 mm (1/4") and 3 mm (1/8").
- Visible and audible measurement gradations permit the adjusting of the sawmills settings to be both easy and accurate.
|
- Supportlegs are quickly and easily adjusted for uneven sites.
- Project logs are securely gripped and prevented from rotating.
- The log supports are independently adjustable thus minimizing wastage of sawing material. The lifting system with its lifting lines and log beds has a capacity of lifting up to 500 kg (1100 lbs).
|
- Perfect squaring. The log clamp presses the project log against long, fixed fences.
- The gripping surface on the short leg facilitates log handling. There are abutments for log table, ramps, and other auxiliary equipment.
- PMX chain from Stihl with 10-degree profile leaves a smooth 6 mm kerf.
|